Many beverage packaging projects stall at the same point: the brand knows its product and the factory has capacity, but nobody has agreed on a bottle size, a resin and a closure that work together. This guide covers those three decisions in order, and points to bottles we already mould in each combination.
1. Fix the bottle size first
Size constrains everything else, because it determines which mould already exists and which filling line the bottle will run on. Our standard beverage moulds cover:
| Volume | Utilisation typique | Resin |
|---|---|---|
| 100 ml | Shots, échantillons, juice concentrate | ANIMAL DE COMPAGNIE, PP |
| 200 ml | Drinking water, small juice | ANIMAL DE COMPAGNIE, PP |
| 250–300 ml | Single-serve juice, soft drinks, eau | ANIMAL DE COMPAGNIE, PP |
| 330 ml | Carbonated soft drinks, sparkling water | ANIMAL DE COMPAGNIE |
| 350 ml | Fresh juice | ANIMAL DE COMPAGNIE |
| 400 ml | Milk and yogurt drinks, soft drinks | PP |
| 500 ml | Water, jus, ready-to-drink tea | ANIMAL DE COMPAGNIE |
| 1.5 L | Family-size juice and water | ANIMAL DE COMPAGNIE |
| 2 L | Large-format water and soda | ANIMAL DE COMPAGNIE |
Where a standard size is close enough, using an existing mould removes both the tooling cost and the lead time a new mould would add.
2. Match the resin to the fill process
ANIMAL DE COMPAGNIE is the default for still water, jus, ready-to-drink tea and carbonated soft drinks. It is crystal clear, lightweight, and gives the strongest oxygen and CO₂ barrier of the common bottle resins. It suits ambient and cold fill, with hot-fill grades available up to about 85°C. See the PET bottle range.
PP handles higher temperatures and is the better choice for milk, yogurt drinks and any product filled hot. It is translucent rather than clear. PP is also the resin behind most bottle caps, because of its living-hinge performance. See the PP bottle range.
3. Choose the closure before the mould is cut
The neck finish is moulded into the bottle, so the cap has to be decided first — changing a neck finish later means cutting a new mould. Our beverage bottles take screw caps, flip-top caps, sports caps and corks, with the neck finish matched to a standard (GCMI, SPI or PCO) so the closure can be sourced independently of the bottle.
Bottles available for your specification
- 500 ml clear PET water bottle
- 330 ml PET carbonated drink bottle
- 350 ml clear PET juice bottle
- 1.5 L PET bottle
- 2 L PET family-size bottle
- 400 ml PP beverage bottle
See how the bottles themselves are produced in our PET bottle manufacturing guide, or compare bottle closures across the full product range.
Send us your specification
Tell us your product, target volume, filling temperature and shelf-life target, and we will come back with a bottle size, a resin and a closure recommendation with a quotation. Request a quote.
Identifiant WeChat