Skip to main content
China food-contact production licence · 闽XK16-204-B0109 Mon – Fri 08:30 – 18:00 (GMT+8)
OEM / ODM custom packaging

Home/News & Insights/Moisture Barrier Properties of HDPE Bottles for Hygroscopic Pharmaceutical Products
News

Moisture Barrier Properties of HDPE Bottles for Hygroscopic Pharmaceutical Products

Why HDPE is the moisture barrier of choice, and where it stops being one

Moisture protection in a plastic bottle is not a matter of wall thickness alone. It is decided by the chemistry of the polymer first, the geometry of the container second, and the closure third — and the three are not interchangeable. HDPE happens to sit at one extreme of a trade-off that runs through every commodity plastic: it is an excellent barrier to water vapour and a poor barrier to oxygen. Understanding why that trade-off exists is what allows a packaging decision to be made on evidence rather than on habit.

Water Vapor Transmission Rate (WVTR)

WVTR measures the mass of water vapour that crosses a given area of material in a given time, at a defined temperature and relative humidity. Because the result scales with thickness, it is usually normalised either as a permeability coefficient — grams of water per millimetre of thickness per square metre per day, written g·mm/(m²·day) — or as a rate for a stated film thickness. The standard test condition in packaging work is 38 °C and 90% relative humidity, which is close to a hot, humid warehouse rather than to a climate-controlled store.

Two test methods cover the measurement. ASTM F1249 places the specimen between a humid chamber and a dry nitrogen stream and detects the transmitted vapour with a pressure-modulated infrared sensor; it is fast, sensitive and the usual choice for films. ASTM E96/E96M is the older gravimetric cup method — a cup of desiccant or water sealed with the specimen and weighed over time — which is more direct but far slower for low-permeability materials. Equivalent instrumental methods exist as the ISO 15106 series.

PolymerWVTR, g·mm/(m²·day)Relative moisture barrier
PVDC0.036Best of the common polymers
Biaxially oriented PP0.10Excellent
HDPE0.12Excellent — the benchmark for rigid containers
Rigid PVC0.36Moderate
LDPE0.39Moderate
Oriented PET0.39 – 0.51Moderate
EVOH, 44 mol% ethylene0.56Moderate
EVOH, 27 mol% ethylene2.24Poor — used for its oxygen barrier, not its moisture barrier
Nylon 6, unoriented5.9 – 7.9Poor

The ordering is not random. Polyethylene and polypropylene are non-polar hydrocarbon chains: water, a polar molecule, has little affinity for them and does not dissolve into the wall readily. Polymers with polar groups along the backbone — PET’s ester linkages, nylon’s amide groups, EVOH’s hydroxyl groups — attract water, which both plasticises the wall and provides a pathway for it to move. That is why the polarity that makes EVOH and nylon outstanding oxygen barriers makes them poor moisture barriers, and why a coextrusion is often needed when a product demands both.

MaterialMVTR, g/m²/day (25 µm film)OTR, cm³/m²/day (25 µm film)
HDPE5 – 121,500 – 2,000
PP3 – 71,800 – 2,500
PET16 – 2060 – 120
Rigid PVC20 – 6050 – 80
LDPE15 – 257,000 – 8,000
Polystyrene70 – 1604,000 – 6,000

Read the two columns together and the design decision becomes explicit. HDPE transmits roughly one fifteenth as much water vapour as PET but more than fifteen times as much oxygen. A hygroscopic product that is not oxidation-sensitive belongs in HDPE. A product that is both moisture-sensitive and oxygen-sensitive — certain vitamins, some biologics, oxygen-sensitive oils — cannot be served by a single-layer bottle of any of these polymers, and needs either a multilayer structure with an EVOH or nylon barrier layer, or a different primary package entirely.

Hygroscopic Product Protection

A hygroscopic solid takes up moisture from its environment, and the rate at which it does so is driven by the difference between the water activity of the product and the relative humidity in the container headspace. That headspace humidity is set by the balance between water entering through the wall and closure and water absorbed by the product itself. A container with a low MVTR therefore does not merely slow uptake — it holds the headspace at a lower equilibrium humidity, which keeps the product further from the threshold at which caking, hydrolysis or deliquescence begins.

This is why the polymer choice dominates the design. Wall thickness is a real but weaker lever: transmission is inversely proportional to thickness, so doubling the wall roughly halves the ingress rate, at the cost of roughly doubling the material. Choosing a polymer with a fifth of the permeability achieves far more, for free. Thickness beyond what the shape needs is usually money spent to solve a problem that material selection would have solved outright — the same logic that governs how wall thickness and material distribution affect bottle quality.

The second lever is the headspace itself. A desiccant sachet or canister placed in the container buffers the headspace humidity, absorbing moisture as it enters and holding the equilibrium low until its capacity is exhausted. It does not reduce the ingress rate — it delays the point at which the product’s own critical humidity is reached, buying time that is bounded by the desiccant’s capacity rather than by the amount of desiccant in the bottle. Sizing a desiccant is therefore a calculation against the container’s MVTR and the required shelf life, not a default sachet dropped into every bottle. Desiccants are treated as auxiliary packaging components under USP <670>, and they carry their own material clearance obligations.

Where a product is both hygroscopic and oxygen-sensitive, the layered answer is a multilayer bottle or an alternative format. It is worth saying plainly that a single-layer HDPE bottle is not the right package for an oxygen-sensitive hygroscopic API, however thick the wall — the failure would not be a manufacturing defect, it would be a mismatch between the product’s sensitivity profile and the polymer’s property profile.

Closure System Considerations

In a well-designed container, the wall is rarely the path by which most moisture enters. The closure interface is. A threaded closure relies on a liner compressed against the land of the finish, and every pathway that exists at that interface — a liner that has not recovered, a finish dimension out of tolerance, a thread that does not draw the closure down evenly — becomes a route with a transmission rate many times that of the wall beside it. Treating the closure as a detail decided at the end of a project is the most common way a good barrier bottle ends up with a mediocre shelf life.

Closure or seal optionWhat it doesWhere it fits
LDPE linerCompresses against the finish land; good moisture sealThe default for hygroscopic solid dose and powders
Pulp and foil laminateFoil faces the product, pulp provides compressionHigher barrier demand; combines a moisture and a light barrier
Induction foil sealHeat-sealed membrane bonded to the finish; removed on first openingTamper evidence plus a high-integrity seal for the shelf life before opening
Linerless closureRelies on a machined sealing ribSimpler and cheaper, but a weaker moisture barrier — needs justification against the product’s sensitivity
Desiccant linerAbsorbs moisture from the headspace at the closureUseful where a free desiccant cannot be added to the fill

Two measurements decide whether any of these actually seals. The first is removal torque, measured with a calibrated torque tester on the conditioned pack. The number that matters is not the torque applied at the capper but the torque still present after the liner has relaxed — a lined closure loses a meaningful share of its applied torque within the first day, so the specification has to be set on the relaxed value, not the application value. Where child resistance is claimed, the pack also has to satisfy the child-resistance protocol at 16 CFR 1700.20, and that test imposes its own requirements on how easily the closure can be removed.

The second is seal integrity, tested rather than assumed. Bubble-emission testing per ASTM D3078 and vacuum decay methods both detect leaks that visual inspection cannot, and for products that ship internationally it is worth adding distribution testing in the ASTM D4169 family to confirm the pack survives the journey with its seal intact. A closure that passes on the bench and fails after a pallet drops is a specification problem waiting to be discovered by a customer.

Shelf Life Prediction

Shelf life for a packaged pharmaceutical product is established through stability testing, and the governing reference is ICH Q1A(R2). Its conditions are specific and worth having to hand, because the moisture behaviour of a container cannot be interpreted without them.

StudyConditionMinimum data at submission
Long term, general case25 °C ± 2 / 60% RH ± 5, or 30 °C ± 2 / 65% RH ± 512 months
Intermediate30 °C ± 2 / 65% RH ± 56 months, triggered when significant change occurs at the accelerated condition
Accelerated40 °C ± 2 / 75% RH ± 56 months, with at least three time points including the first and last
Long term, semi-permeable container25 °C / 40% RH, or 30 °C / 35% RH12 months
Accelerated, semi-permeable container40 °C with not more than 25% RH6 months

The last two rows are the ones that catch people out, and they are a direct consequence of the physics above. A semi-permeable container — an LDPE bottle, for example — is tested at low external humidity rather than at 75% RH, because the dominant risk for an aqueous product in a semi-permeable pack is not moisture ingress but water loss through the wall. Testing such a pack under the general-case accelerated humidity would interrogate the wrong failure mode.

Data is normally required on at least three primary batches, tested every three months in the first year, every six months in the second, and annually thereafter. Two cautions apply as of late 2026. First, the whole Q1 series is under revision, with a unified ICH Q1 having reached Step 2 in April 2025 and Step 4 adoption expected around November 2026, so the current text should be checked rather than recalled. Second, accelerated data does not produce a shelf life — it identifies a failure mode. Extrapolation to a claimed shelf life is governed by ICH Q1E and by the real-time data, not by the accelerated result.

Where WVTR data earns its place in that programme is early selection. Measuring the transmission rate of two or three candidate containers lets a project rank them before committing to a full stability study in each, and it explains a failure when one occurs: a container that passed its specification but still let a product drift out of trend has a transmission rate that can be compared against the requirement, rather than an unexplained result.

Regulatory Compliance

The framework around pharmaceutical plastic packaging changed recently, and two of the changes are material to anyone specifying an HDPE container.

USP <661> was replaced on 1 December 2025 by USP <661.1> and USP <661.2>. The first covers plastic materials of construction — the resin itself, tested for identity, physicochemical properties and composition — and the second covers the finished packaging system including the closure, with a chemical safety assessment built on extractables and leachables testing. The intent of the split is to stop treating a material and a finished container as if they were the same question. Passing <661.1> does not by itself make a container suitable, and failing it does not automatically bar a material — it obliges the applicant to understand and justify the result.

On the functional side, USP <671> Container Performance Testing is the chapter that provides for moisture vapour transmission rate measurement on plastic packaging systems for solid and liquid oral dosage forms, together with a classification system that allows repackagers to select suitable containers, and light transmission testing where the container is intended to protect against light. USP <1671> is the companion chapter that explains how to apply MVTR data for solid oral dosage forms and defines an upper limit for MVTR. Where desiccants are used, they fall under USP <670> on auxiliary packaging components, and where extractables and leachables work is required, the methodology sits in USP <1663> and <1664>.

ReferenceWhat it coversWhy it matters for an HDPE container
USP <661.1>Plastic materials of constructionApplies to the HDPE resin, tested as a material rather than as a bottle
USP <661.2>Plastic packaging systems for pharmaceutical useApplies to the complete pack including the closure, with an E&L assessment
USP <671>Container performance testingSets out MVTR measurement and the container classification used in repackaging
USP <1671>Application of MVTR for solid oral dosage formsExplains how to use the data and defines an MVTR upper limit
USP <670>Auxiliary packaging componentsApplies to desiccants and other components added to the pack
21 CFR 177.1520Olefin polymers, food contactThe clearance basis for the HDPE grade, with density and extractables specifications
ISO 15378:2017Primary packaging materials for medicinal productsISO 9001 with GMP requirements for the manufacturing environment

The material clearance side is worth stating explicitly, because it is the foundation everything else rests on. An HDPE grade for pharmaceutical or food use is cleared under 21 CFR 177.1520, which sets density, melting point and extractable fraction limits for the polymer. We set out how those numbers work, and how the clearance chain is documented, in our FDA 21 CFR compliance guide. The manufacturing environment side is covered by ISO 15378, which we describe in our guide to ISO 9001 and process control.

Put together, a defensible moisture-protection specification for a hygroscopic product names four things: the polymer and its transmission rate, the wall thickness the shape actually requires, the closure and liner system with its seal and torque verified on the real pack, and the container’s MVTR data placed against the USP <671> and ICH Q1A(R2) framework. Anything less is a container that might work.


📱 WhatsApp: +86 181 5928 4005
✉️ Contact us for technical consultation and product specifications!

Browse our HDPE bottles for pharmaceutical and personal care use, or a specific format such as our 120 ml HDPE child-resistant medicine bottle. For food-contact applications, see custom PET bottles and PP bottles, or request a quote with your product’s sensitivity profile and target shelf life. If you are still at the specification stage, our MOQ, lead time and pricing guide explains what a complete quotation should contain, and our guide to requesting free samples covers what to evaluate when they arrive.

Get A Quote

Tell us capacity, material and quantity
We come back with options and pricing

Contact WhatsApp
WeChat QR code WeChat ID +8618159284005
Email +86 181 5928 4005